HMS BE4554, Руководство пользователя

Страница: 19 / 49

•
When use time a week is more than 7 hours, it should be lubricated once in one month.
•
When use time a week is more than 7 hours, it should be lubricated once in one month.
•
It can’t be over -lubricated. It is not the more lubricant, the better. Remember: proper
lubricating is the important factor to increase the treadmill’s service time.
Lubricating methods
For the methods to examine whether it is needed lubricant, you only need catch up the running belt
and touch the central part of the back of the belt with hand as nearly as possibly. If the belt is with
silicon resin (a bit sense of dampness) inside, this means no lubricant is needed; if the running board
is dry and you feel no silicon resin inside, this means lubricant is needed.
A. Steps for coating the running board with lubricant: (see the picture)
B. Stop the machine, remove safety key.
C. Pick up the belt, coat the inner side of the belt with silicone oil and coat both sides of the belt with
silicone resin.
Place safety key in right position, press star and set speed into 1km/h put your hand on the middle
part of the board and keep in the position for several seconds then move from left to the right to
spread the grease under the belt
Auto lubrication system method
After unpacking the treadmill, open the hole on the back side of the motor cover and add 90ml of
greasing into the hole by one time. The devise will automatically add oil under the running bel when
necessary.
Running belt tension adjustment