如果跑带左偏,则顺时针调节左
边螺丝或逆时针调节右边螺丝
如果跑带右偏,则顺时针调节右
边螺丝或逆时针调节左边螺丝
If deviate to the right, then
adjust the screw on the right side
clockwise or the screw on the left
side anticlockwise.
If deviate to the left, then adjust
the screw on the left side clockwise
or the screw on the right side
anticlockwise.
3. Running belt tension adjustment
All treadmills’ belts should be adjus
ted before leaving the factory and after the installation, however, after it is used for a period,
looseness may occur. For example: when users are running, it may occur pause and slip, if which happens, adjust the belt and bolts
synchronously from both the left and right side in a clockwise direction and with semicircle as the unit; if the running belt is too
loose, it may occur slip between the belt and the roller when treading on the belt; but if too tight, it will be easy to increase the
motor load and damage motor, running belt, roller, etc.
4. Running belt deviation adjustment
All treadmil
ls’ belts should be adjusted before leaving the factory and after the installation, however, after it is used for a period, i
t
may occur belt deviation, which is caused by the following reasons:
3.
The main engine is not placed evenly.
4.
The user’s feet are not
on the center of running belt.
If the deviation phenomenon is caused by the uneven force of the user’s feet, no
-load rotation for a few minutes can make it
normal. F
or deviation phenomenon that can’t return to normal automatically, adjust step by step by
using 6MM inner hexagon
spanner with the machine and with quarter-circle as the unit. Running belt deviation is not covered in the warranty scope and is
mainly maintained by users according to the instruction book. Deviation phenomenon will severely damage the running belt, so it
should be found and corrected in time.
Содержание BE4545
Страница 1: ...BE4545...
