HMS ATLAS TYTAN 7, Инструкция по эксплуатации

Страница: 24 / 53

STEP 4
1. Insert two 50x50 Plugs (51) to the
Leg Extension Arm (11).
2. Attach the Leg Extension Arm (11) to
the Main Bottom Frame (1) with one
M10 Nylon Lock Nut (68), one
M10x70 Hex Bolt (77), two φ10
Washers (64) and twoφ10 Nut
Caps(85).
3. Align the tube of the Low Row
Footplate (5) and the hole of the
Front Frame (10). Then insert the
Tube Shaft (6) into the hole.
4. Align the small hole of the Tube Shaft
(6) and the small hole on the Front
Frame (10). Then insert the Spring
Pin (56) through the hole.
5.
Insert twoφ32 Plugs (48) into the Low
Row Footplate (5).
6.
Insert twoφ25 Plugs (47) to the Foam
Roller Frame (20).
7. Attach the Foam Roller Frame (20) to
the Main Upright (3) with one M10
Nylon Lock Nut (68), one φ10 Arc
Washer (62).
8.
Slide the φ80x160 Foam Roller (45)
onto the Foam Roller Frame (20).
STEP 5
1. Attach the Backrest Pad (24) onto the Main Upright (3) wit
h two M8x55 Hex Bolts (72), and two φ8 Washers (63).
2. Insert the 38x38 Plug (50) into the Seat Adjustment(93).
3.
Attach the Seat Pad(25) onto the Seat Adjustment(93) with four M6x20 Hex Bolts (88) , and four φ6 Big Washers (66).
4. Insert the Sleeve(83) into the Main Bottom Frame (1),then insert the Seat Adjustment(93) into the Sleeve(83).
5. Adjust the height of the Seat Pad(25) position and insert the Locking Pin(87).
6.
Attach the Arm Pad(92) onto the Arm Curl Support(91) with four M6x20 Hex Bolts (88) , and four φ6 Big Washers (66).
7. Insert the Sleeve(84) into the Main Bottom Frame (1),then insert the Arm Curl Support(91) into the Sleeve(84).
8. Adjust the height of the Arm Pad(92) position and insert the Locking Pin (87).