HMS Anybus Communicator IIoT, Руководство для стартапов

Страница: 7 / 12

Installation 7 (12)
2.3.2 Serial Subnetwork Interface
Fig. 3 D-sub connector (DE-9F)
Pin Description RS-232 RS-422 RS-485
1 +5 V Output (100 mA max.)
x x x
2 RS-232 Rx
x
3 RS-232 Tx
x
4 (reserved)
5 Signal Ground x x x
6 RS-422 Rx +
x
7 RS-422 Rx -
x
8 RS-485 + / RS-422 Tx +
x x
9 RS-485 - / RS-422 Tx - x x
Housing Shield
x x x
Do not connect Signal Ground to Protective Earth (PE) of other nodes on
the subnetwork as this may damage the on-board serial transceivers.
Connect it only to the Signal Ground on other nodes.
Bias and/or termination resistors may be required depending on the type of
serial network. Please refer to the User Manual for more information.
Anybus ® Communicator ™ Startup Guide SP2444 1.0 en-US