12 (18)
4.2
Easy Config
1.
Power on the unit and wait for the
Link Quality
LEDs to light up and go out
again, then immediately press and release the
MODE
button.
2.
Press
MODE
repeatedly to cycle through the Easy Config modes until the
desired mode is indicated by the
A-B-C-D
LEDs.
3.
Within 20 seconds of step 2, press and hold
MODE
for 2 seconds. When
the button is released the unit will restart in the selected mode.
4.2.1
Easy Config Modes
EC
LED
Role
Description
1
A
Bluetooth PANU
Configure as a client and scan for
another client (PANU to PANU).
2
B
–
Reset configuration to factory defaults.
3
A
B
–
Reset IP settings to factory defaults.
4
C
Client
Wait for automatic configuration.
5
A
C
WLAN AP
Configure units in mode 4 as clients.
Restart as access point and connect
clients.
6
B
C
Bluetooth NAP
7
A
B
C
WLAN AP
Configure units in mode 4 as clients.
Restart as access point and connect
clients.
Apply PROFINET optimization to all units.
8
D Bluetooth NAP
9
A
D Bluetooth PANU
Configure as a client and scan for
another client (PANU to PANU).
Apply PROFINET optimization to both
units.
10
B
D (any)
Apply PROFINET optimization and
restart.
11
A
B
D (any)
Enable PROFIsafe mode.
The Easy Config modes are also described when selected in the web interface.
Anybus
®
Wireless Bridge II
™
Startup Guide
SP2167 2.1 en-US