HMS-VILGO LIFTY 4, Руководство пользователя

Страница: 15 / 20

15
LIFTY 4 user guide Version 08/2013
4.2. LIFTY 4 USE
4.2.1 Sling 20015 installation and operating :
Reminder : Sling is adjustable. User is responsible for adjusting it in order to not hurt the patient. Lifty4 hoist
is delivered with a 20015 sling. See the user instruction bellow.
1/ Put the back of the sling (largest part of the sling) on the patient back in order to have the 2 hanging-up
straps on both sides of the patient.
2/ Hang up each hanging-up strap to the beam hooks (A1 and B2)
3/ Softly lift up the patient right thigh to put the right thigh support underneath.
4/ Softly lift up the patient left thigh to put the left thigh support underneath.
5/ Cross the two thigh support sling.
6/ Hang up each strap to the beam hooks (C3 and D4)
You can adjust the patient tilt with the different hanging-up holes. Make sure to always hang-up the
A and B straps at the same hole level (same colour). Act the same way for C and D straps.
Cautions :
- This sling is designed for HMS-VILGO hoists only.
- Always hang-up the 4 straps at the same level.
- Never adjust straps while the hoist is running.
- Always make sure that straps are well-attached on the beam before lifting the patient up.
- Never exceed the maximum running load.
4.2.2 Transferring the patient:
1/ Set the hoist in a way that the beam stands above the patient (if necessary,
open or close side foot to get closer to the patient).
2/ Lock brakes
3/ Set the sling
4/ Push up button
of the remote control to lift the support beam (make sure
the strap does not get stuck and does not hurt the patient while lifting him).
5/ Unlock brakes to transfer the patient.
6/ Lock brakes again when transfer done.
7/ Push down button
of the remote control to go down
1
2
3
4
A B
C D
Back of the sling
thigh support straps