HMS-VILGO LIFTY 4, Руководство пользователя

Страница: 14 / 20

14
LIFTY 4 user guide Version 08/2013
3.3. PLUGGING
3.3.1 Plugging/blocking the actuator cable
3.3.2 Unlocking of the actuator cable plug
Unlock with a screw-driver (as shown here), leaning in the notch. In the
same time, turn the ring from the left to the right to unlock the plug.
.
3.3.3 Anti-Pulling up cable kit.
4. USE
4.1. FIRST USE
Even if battery box is immediately ready to run as it is charged when delivered, make sure the hoist
installation has been strictly done as shown on paragraph 3. Test it off load first to get used to it.
3/ Screw the hood to the
control box with a crossed
screw-driver.
3/ Grip the notches and turn
the ring from left to the right.
The cable is locked when the
ring is turned to 90°. 1/ The 3 notches of this
ring show that the griping
device of the cable plug is
unlocked. 2/ Put the cable plug in
position and lean on it
to plunge into the
lodging.
1/ Plug the remote control
and the actuator cables
and plug the shutter. 2/ Put the anti-pulling
up hood in placing the
cables through the
opening.