HMS Premium ST01, Руководство пользователя

Страница: 28 / 74

Keyboard operation instructions
"PROG": program selection button, in the stop state, cycle selection program P1~P36, U01, U02, U03,
FAT;
“MODE”: When the manual mode is selected to be th e normal mode, press the MODE button to
cycle through the countdown mode in manual mode->countdown calorie mode->positive timing
mode; countdown time in P01-P36 The default value (30 minutes) of the reset button;
"START/STOP": start/stop button, in the stop state, start the stair machine; in the running state, stop
the stair machine;
“+”: the speed gear step plus key, in the stop or fat test state, the set parameter is added to the key,
in the running state, the speed gear is added with the key;
"-": speed gear decrement key, in the stop or fat test state, set the parameter decrement key, in the
running state, the speed gear decrement key;
Safety key function description
The safety key consists of copper inserts, clothes pegs and nylon cords, with safety protection for
emergency stop. In any state, as long as the safety key is out of position, the stair machine stops
running, the electronic watch keypad prohibits operation, and the screen displays “E - 07” with a
prompt tone. Each time the security key is placed, the screen will be displayed for 2 seconds, and
then enter the system default working state.
Safety Guide
1. Insert the power cord plug into the 10A power socket with safety ground, turn on the power switch,
the console screen is fully displayed with a prompt tone, and then identify the security lock;
2. Put the safety key on the position on the console, and put the clothespin on the clothes on the chest.
After the screen is fully displayed for 2 seconds, it will enter the default working state: all the counters
are cleared, the set value is reset, and the stair machine is in manual mode. In the positive timing
mode of program P0;
3. Press the “PROG” button to cycle through a program: P1~P36, U1, U2, U3, FAT;
4. “P0” is the user - defined program. Press “MODE” to cycle through the training mode. The speed
position of the training is set by the user. The default value is: speed gear position 1.0 (14
steps/minute).
5. Training mode 1: counting time, time, calories are counting, and the setting function is turned off;
6. Training mode 2: Countdown time, in the setting state, the time window flashes, press “+”, “ - ” to
modify the setting value, the setting range is 5-99 points, the default value is 30:00;
7. Training mode 3: Invert the calories, in the setting state, the cal orie window flashes, press “+”, “ - ” to
modify the setting value, the setting range is 20-990CAL, the default value is 50CAL;
8. “P1 - P36” is the system setting program, only training in the countdown time mode. In the setting
state, the time window flashes, press “+”, “ - ” to modify the set value, press “MODE” to reset to the
default. Value, setting range: 5-99MIN, default value: 30:00;
9. After setting the training mode, press the “START” button, the screen will start to display the 5 second
countdown, accompanied by 5 beeps. After the countdown is 1, the stairwell will start gently and
slowly accelerate to the displayed speed position, then Smoothly running at a constant speed.
10. In the running state, press the “+”, “ - ” button or “QUICK SPEED” button to a djust the speed of the stair
machine;
11. In P1-P36, the speed gear of each program is divided into 10 segments, each time is divided equally
according to the set time, and the speed gear after the button adjustment is valid only in the current