HMS Premium BE5856, Руководство пользователя

Страница: 32 / 70

Treadmill Maintenance
Proper maintenance is very important to ensure a faultless and operational condition of the
treadmill. Improper maintenance can cause damage to the treadmill or shorten the life of the
product.
All parts of the treadmill must be checked and tightened regularly. Worn out parts must be replaced
immediately.
Adjustable waist belt
•
When you run, you may push off harder with one foot than with another. The severity of the
deflection depends on the amount of force4 that one foot exerts in the relation to the other.
•
This deflection can cause the belt to move off- centre. This deflection is normal and the
running belt will centre when no body is on the running belt.
•
If the running belt remains consistently off-centre, you will need to centre the running belt
manually.
•
Start the treadmill without anyone on the running belt, press FAST-key until speed reached
6kph.
•
Observe whether the running belt is toward the right or left side of the deck.
•
If toward the left side of the deck, using wrench, turn the left adjustment bolt clockwise 1/4
turn and the left adjustment bolt counter clockwise 1/4.
•
If toward the right side of the deck, turn the right adjustment bolt clockwise 1/4 turn and the
left adjustment bolt counter clockwise 1/4.
•
If the belt is still not centre, repeat the above step until the running belt is on centre.
•
After the belt is centre, increase the speed to 16kph and verify that it is running smoothly.
Repeat the above steps if it is necessary.
•
If the above procedure is unsuccessful in resolving the off-centre, you may need to increase
the belt tension.
Lubrication
The treadmill is factory-lubricated. However, it is recommended to check the lubrication of the
treadmill regularly, to ensure an optimal operation of the treadmill. It is usually not necessary to
lubricate the treadmill in the first year or the first 500 hours of operation.
After every 3 months of operation, lift the sides of the treadmill and feel the surface of the belt, as
far as possible. If traces of silicon spray are found, lubrication is not necessary.
In case of a dry surface refer to the following instructions. Only use oil free silicon spray.