Intesis
TM
KNX
– Modbus Master
User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
19 / 19
7
Electrical & Mechanical Features
Enclosure
Plastic, type ABS (UL 94 V-0)
Net dimensions (d
x
w
x
h): 71x71x27 mm
Color: White. RAL 9010
Mounting
Wall.
Power
Supplied through KNX bus. See on KNX Port.
KNX Port
1 x KNX TP-1 Plug-in screw terminal block (2 poles)
2500VDC isolation from other ports
KNX power consumption: 20mA
Voltage rating: 29VDC
PORT A
1 x Serial EIA485 Plug-in screw terminal block (3 poles)
A, B, SGND (Reference ground or shield)
1500VDC isolation from other ports
Push Button
Sets device in programing mode in KNX network
Operation
Temperature
0°C to +60°C
Operational
Humidity
5 to 95%, no condensation
Configuration
Jumpers
3 x Jumpers for serial EIA485 configuration:
Jumper 1:
Connected:
120 Ω termination active.
Disconnected:
120
Ω termination inactive.
Jumper 2 & 3:
Connected:
Polarization active.
Disconnected:
Polarization inactive.
LED Indicators
3 x Onboard LED indicators
2 x Port A TX/RX
1 x KNX Prog Mode
