Intesis
TM
KNX
– Modbus Master
User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
17 / 19
8.
Bit
If using multiple bit (bit fields), it indicates the first bit you want to read
9.
# Bits
If using multiple bit (bit fields), it indeicates the number of bits you want to read
10.
Operation
It indicates if any operation is being applied to the signal. Posible operetations are multiplication and division
per 10 and 100; and relational operator equal.
11.
Operation value
It defines an operand for the operation configured. Only
Is equal
operation allow to configure the operand.
6.2.5 Sending the configuration to Intesis
When the configuration is finished, use the standard way of ETS software to download the configuration to Intesis
gateway, using the download button.
Figure 6.4
Downoad button from ETS
