HLS MHR 11, Руководство по эксплуатации

Страница: 8 / 33

8
With
Set
and
Start / Stop
you can
navigate to the digit of the set value
which should to be changed.
Change
values:
The digit of the set value is increased
or decreased by pushing
+
or
-
.
By exceeding the value 9, the next
decade is increased automatically.
To activate the hundreds digit, ex-
ceed the value 9 on the 2. digit.
By falling below the value 0, the
next-lower decade is selected auto-
matically.
Confirm set
value:
Push OK and the current actual val-
ue is displayed again.
Start heat-
ing process:
If the system heats, a “
: “
emerges.
The green LED lights. If a process
time is preset, the horizontal hyphen
flashes as an
to indicate the preset time.
Push
Start / Stop
.to start the heat-
ing process. Depending on the heat
output it either flashes or is perma-
nently visible.
Stop heat-
ing process:
.
The “
: “
turns off and the current
temperature actual value is dis-
played. If a process time is preset
and if the process is stopped before
the expiration of this time, the clock
is reset to 0:00. For that push