HLS MHR 11, Руководство по эксплуатации

Страница: 7 / 33

7
At delivery, the changeable blocks are packed separately. Place the blocks on
the tempering plates and take care of the proper alignment of the central
threaded bolt and the two small corner bolts ensuring that the block lays
accurately on the tempering plate. Then attach the block with the short sock-
et screw tightly at the bottom of the tempering plate to get the block fixed for
shaking and to obtain even better temperature accuracy.
Check the tight attachment of the block by pulling it up. If it loosens, please
use the longer screw.
Never start the process without the block being tightly attached. Do
always use two blocks for two-block systems, even if only one of
them is used. This ensures safety as well as a smooth shaking opera-
tion.
Switch on the system with the mains switch on the back of the system, the
actual temperature value is indicated on the display.
Temperature Setting
Actual
value:
After power-on, the current actual
temperature value is displayed.
Display set
value:
Push
Set
. The last entered set value
is displayed and a hyphen appears
on the top left as a marking.
Back to
actual
value:
Push
OK
and the current actual val-
ue is displayed.
Change set
value:
Push
Set
to get to the set value.
Push
Set
again, hold it for five sec-
onds and then release the button.
The cursor stands now at the figure
in the middle (1. Digit position).