HLS INFRABEAM IB2017-1, Инструкция по эксплуатации и сборке

Страница: 33 / 36

HLS Infrabeam EN 33
DISPLAYER ON THE CONTROL PANEL
➀ Over time warnings: In 5 different languages,
➁
Over heat warnings: In 5 different languages,
➂ Power setting bars of the left two heating tubes,
➃
Digital displayer for showing temperature and standby mode,
➄ Temperature unit,
➅
Power setting bars of the right two heating tubes.
OPERATION OF THE GRILL
If the power supply cord or tubes are damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
➀ ➁
➂ ➃ ➄ ➅
Turn on/Off the Grill:
Plug the grill to power supply, the grill goes into
a „stand by“ mode, the digital displayer show
„OFF“ without back light.
Push both knobs and keep in depressed position
for 3 seconds, the grill turns to „work“ mode, the
back light of the displayer turns on, and display-
er shows a temperature.
Push both knobs again for 3 second to turn the
grill back to „stand by“ Mode.
To select language:
Push and keep the left knob in depressed positi-
on for 3 seconds, all warning words are showed
on the screen, the selected language is blinking.
Release the knob, push again to select a langua-
ge. When a new language is selected, release the
know for 3 seconds, all warning words disappear
on the screen and the new languish selected.
To select Temperature unit:
Push and keep the right knob in depressed po-
sition for 3 seconds, the temperature unit shifts
from „C“ to „F“ and vise versa.