Operation Procedure
Operate this product by following the steps below:
1
Lift locking ring (2) and insert feeding chute (1)
into main body. Then press down locking ring(2) to fix
2
Align the metal rod of the auger with the opening in the Main
Body.
Push it in. If the auger will not go in all the way, slightly rotate
it and
try again.
3 With the wide opening first, align the notches on filter
to the openings in the feeding chute. Push it in.
4
While pushing the end cap into the feeding chute, align the
notches
on the end cap to the openings in the feeding chute.
Turn the Juicer Cap counter clockwise
5
Place juice container under feeding chute with its opening
right below the outlet. (juice baffle should be mounted in the
container in advance to seperate foam in the juice)
6
Place pulp container below the end cap outlet, close the
juice container.
7
Install the hopper on the upper end of the feeding chute.
The hopper can make feeding of food ingredients more
convenient,
particularly when small-particle food ingredients like grapes
and
strawberries are processed
8
Connect to power supply and get ready for operation.
(Before power-on, make sure the knob is in Off position.)
