Copyright HK Instruments 2019
www.hkinstruments.fi
Installation version 8.0 2019
The seller is obligated to provide a warranty of five years for the deliv-
ered goods regarding material and manufacturing. The warranty period
is considered to start on the delivery date of the product. If a defect in
raw materials or a production flaw is found, the seller is obligated, when
the product is sent to the seller without delay or before expiration of
the warranty, to amend the mistake at his/her discretion either by re-
pairing the defective product or by delivering free of charge to the buy-
er a new flawless product and sending it to the buyer. Delivery costs
for the repair under warranty will be paid by the buyer and the return
costs by the seller. The warranty does not comprise damages caused by
accident, lightning, flood or other natural phenomenon, normal wear
and tear, improper or careless handling, abnormal use, overloading, im-
proper storage, incorrect care or reconstruction, or changes and instal-
lation work not done by the seller or his/her authorized representative.
The selection of materials for devices prone to corrosion is the buyer’s
responsibility, unless otherwise is legally agreed upon. Should the man-
ufacturer alter the structure of the device, the seller is not obligated to
make comparable changes to devices already purchased. Appealing for
warranty requires that the buyer has correctly fulfilled his/her duties
arisen from the delivery and stated in the contract. The seller will give
a new warranty for goods that have been replaced or repaired within
the warranty, however only to the expiration of the original product’s
warranty time. The warranty includes the repair of a defective part or
device, or if needed, a new part or device, but not installation or ex-
change costs. Under no circumstance is the seller liable for damages
compensation for indirect damage.
Register
Parameter description
Data Type
Value
Range
3x0001
Program version
16 bit
0...1000
0,00...99,00
3x0002
Pressure reading
16 bit
-250...2500/7000
-250...2500/7000 (Pa)
3x0004
Input 1: 0...10 V
16 bit
0...1000
0...100 %
3x0005
Input 1: Pt1000
16 bit
-500...500
-50...+50 °C
3x0006
Input 1: Ni1000
16 bit
-500...500
-50...+50 °C
3x0007
Input 1: Ni1000-LG
16 bit
-500...500
-50...+50 °C
3x0008
Input 1: NTC10k
16 bit
-500...500
-50...+50 °C
3x0009
Input 2: 0...10 V
16 bit
0...1000
0...100 %
3x0010
Input 2: Pt1000
16 bit
-500...500
-50...+50 °C
3x0011
Input 2: Ni1000
16 bit
-500...500
-50...+50 °C
3x0012
Input 2: Ni1000-LG
16 bit
-500...500
-50...+50 °C
3x0013
Input 2: NTC10k
16 bit
-500...500
-50...+50 °C
Function 04 - Read input register
Function code 02 - Read input status
Register
Parameter description
Data Type
Value
Range
1x0001
Input 1: BIN IN
Bit 0
0...1
On - Off
1x0002
Input 2: BIN IN
Bit 0
0...1
On - Off
Function 05 - Write single coil
Register
Parameter description
Data Type
Value
Range
0x0001
Zeroing function
Bit 0
0...1
On - Off
Function code 06 - Write single register
Register
Parameter description
Data Type
Value
Range
4x0001
Beta value of NTC thermistor
16 bit
0...30000
1...30000 (Default: 4220)
STEP 6: MODBUS REGISTERS
WARRANTY POLICY
RECYCLING/DISPOSAL
The parts left over from installation should be
recycled according to your local instructions.
Decommissioned devices should be taken to a
recycling site that specializes in electronic waste.
