HJM_RCL_ENG_Rev.1_30-11-2017
Made in Spain
17
/
21
5.
Pressing the
button we select the COMFORT mode in this time interval (the
whole interval will be highlighted). Pressing the
button we select the
ECONOMY mode for this time interval (half an interval will be highlighted). And so
on until completing the 24 hours of day 1=Monday. Confirm the programming
with the
button.
6.
Automatically, the programming goes on to day 2=Tuesday, maintaining the
programming established for Monday. If you wish to maintain it, press directly on
the
button to confirm and go to the next day. Otherwise, you can change
using the
and
buttons to programme as you wish.
7.
Follow the same steps for each day of the week until reaching day 7=Sunday.
CALIBRATION OF THE TEMPERATURE SENSOR
If the radiator is not installed in the optimum location to suitably detect the room
temperature (for example: it is installed on a cold wall or there are draughts…) the
measured room temperature may be different from the real temperature. In order to
achieve maximum efficiency, it is recommendable to eliminate this temperature
difference.
To do so, follow these steps:
1.
Turn the radiator to off/stand-by mode. The
icon will be shown.
2.
Press the
button for more than 3 seconds. Using the
button we can see
the following options: “
ted
”(hour and date), “
prog
”(programming) and
“
ofst
”(calibration of the temperature sensor).
3.
Select the “
ofst
” option and confirm with the
button.
