1
Take out the trash container
Open the cleaning head cover to take out the trash container.
Insert the cleaning roller
Insert the trash container
Assemble the upper and lower body
Insert the battery
Place the lower body on its side, insert the cleaning roller onto the drive motor, then push and fix it into
the cleaning head till the lateral button in place.
Note:
1. The maximum open angle of the drive motor is 45°.
2. Please immerse the cleaning roller in clean water if it is not soft.
Place the lower body in an upright position, open the cleaning head cover, insert the trash container and press it in
place, then place one disposable trash container and close up the cleaning head cover.
Remove the quick-mount screw in the body, connect the flat cables of upper and lower bodies, make sure the upper
and lower body connect exactly, then insert the quick-mount screw and tighten it with a coin or screwdriver.
Insert the battery into the battery compartment in the lower body and tighten the screw with a coin or screwdriver.
Lock
MAX
Assembling
Quick Start Guide
