background image

ON

OFF

SWING

FAN

TEMP

TIMER

MODE

RESET CODE

LOCK

POWER/SOFT

AUTO

ON

OFF

H

A

B

i

on

COOL

DRY

HEAT

AIR FLOW SPEED SWITCH

TEMPERATURE INDICATOR

En-9

Parts and Functions

Wireless Remote Controller

OPERATION MODE
INDICATOR

AIR FLOW SPEED
INDICATOR

DESIGNATED
PERIOD INDICATOR

AIR FLOW DIRECTION
SWITCH

MODE SWITCH

indicates      the       current
operating  mode.

ON/OFF SWITCH

Indicates  the  air  flow speed
selected    by   the   air  flow
speed  switch.
When set at "AUTO",micro-
computer       selects      the
adequate    air   flow  speed
automatically   according  to
the  difference   between  the
designated temperature and
the room temperature.

Indicates  the  period  set  by
the  time  setting  switches.

Starts operation with a press;
stops operation with another
press.

Air   flow  direction   can  be
changed  vertically  (upward
and   downward )   by  each
press.

Used to select COOL,DRY
and HEAT operation.

The above example of indications is for the purpose of
explanation only and it is different from actual indications.

TIMER MODE INDICATOR

POWER MODE INDICATOR

TIME SETTING SWITCHES

SIGNAL SENDING HEAD

POWER MODE SWITCH

Sends signals to the remote
signal receiver of the indoor
unit.

Lights  up  when a signal is
sent to the indoor unit.

Indicates the temperature set
by  the  temperature  setting
switches.

OFF:  The   air  conditioner
stops  operation   after   the
designed  period.
On:The air conditioner starts
operation  after the designed
period.

Used to set soft or super
mode operation.

   :The indicated temperature
increases by 1°C(1.8°F) per
press.
   :The indicated temperature
decreases by 1°C(1.8°F) per
press.
When    the   switches   are
pressed  continuously ,  the
indicator changes quickly.

Used when setting the period
before the operation starts
or stops.

RESET

Used to reset the controller
back to normal condition.

Used to select TIMER ON,
TIMER OFF.

Used when adjusting the air
flow speed.

TIMER MODE SWITCH

TEMPERATURE
SETTING SWITCHES

AUTO

AUTO

HI

MED

LO

Used to lock the buttons and
LCD display.

LOCK INDICATOR

CODE INDICATOR

Used to send code A or B
with a press,A or B will be
displayed on LCD.Please
select A without special
explanation.

Note

:

There is no health function with these types.
Multi-split type has no power function.

SIGNAL   SENDING
INDICATOR

LOCK

CODE

Содержание HME 10 TW03 I/HOME 20 TW03 I
































Отзывы: