With this function, the system starts
operating after the designated period: the
system can be set to turn on automatically
at the time of awakening or arriving home.
ON Timer Function
Timer Function Usage
Operation
Press the ON/OFF switch
Make sure that the operating conditions are those
desired.
Set the timer mode to "ON"
by pressing the timer mode
switch.
Make sure that the timer mode indicator of the indoor
unit lights up.
Set the operation period by
pressing the time setting
switches.
The operation period can be set from 1 hour to 12
hour by an hour.
1
2
3
Just press the timer mode switch several times until
TIMER mode disappears.
Timer Cancellation
4
Once the timer function is set, the period is memorized. From next time, you can operate easily with
operation of the ON/OFF switch and the timer mode switch.
After replacing the dry batteries, the designated period is set automatically as follows: OFF: 1 hour,
ON: 6 hours.Set the timer again if necessary.
If the power fails, set timer again.
NOTICE
Only some of the models have this function. If the unit is started for the first time, the compressor will
not start running unless 3 minutes have elapsed. When the power resumes after power failure, the
unit will run automotically, the power indicator lights up, and 3 minutes later the compressor starts
running with the indicator lighting up.
Power Failure Resume Function
En-17
ON
OFF
SWING
FAN
TEMP
TIMER
MODE
RESET CODE
LOCK
POWER/SOFT
ON
H
A
2
4
1
3
