24
ENGLISH
TIMER Operation
Push TIMER ON button to set the auto- on time and TIMER OFF button to set the auto-off time.
1. To set the starting time.
1.1 Push the TIMER ON button, then the remote controller shows TIMER ON , the last set time for the
starting operation and the signal “h” will be shown on the DIGITAL DISPLAY area. You are now ready to
reset the time to START the operation.
1.2 Push the TIMER ON button again to set desired unit start time.
1.3 After setting the TIMER ON ,there will be a one-half second delay before the remote controller transmits
the signal to the air conditioner. Then, after approximately another 2 seconds, the signal “h” disappears
and the set temperature will re-appear on the digital display.
2. To set the stopping time.
2.1 Push the TIMER OFF button and the remote controller will show TIMER OFF, the last set time for the
stopping operation and the signal “h” will be shown on the DIGITAL DISPLAY area.
You are now ready to reset the time of the STOP operation.
2.2 Push the TIMER OFF button again to set the time you want to stop the operation.
2.3 After setting the TIMER OFF ,there will be a one-half second delay before the remote controller
transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal “h”
disappears and the set temperature will re-appear on the digital display.
3. Set the starting & stopping time
3.1 Push the TIMER ON button, the remote controller will show TIMER ON, the last set time for START
operation and the signal “h” will be shown on the DIGITAL display area. You are now ready to readjust
the TIMER ON to start the operation.
3.2 Push the TIMER ON button again to set the time you want to start the operation.
3.3 Push the TIMER OFF button, the remote controller will show TIMER OFF, the last set time for STOP
operation and the signal “h” will be shown on the DIGITAL display area. You are now ready to reset the
time to STOP operation.
3.4 Push the TIMER OFF button again to set the time you want to stop the operation.
3.5 After setting the TIMER, there will be a one-half second delay before the remote controller transmits the
signal to the Air Conditioner. Then , after approximately another 2 seconds, the signal “h” disappears
and the set temperature will re-appear on the digital display.
Change the TIMER
To change the TIMER ON/OFF time, just press the corresponding TIMER button and reset the time.
•
To cancel the TIMER ON/OFF setting, just adjust the TIMER time to 0:00.
•
NOTE
The setting time is relative time. That is the time set is based on the delay of the current time.
Warning
1. Be sure there are no obstacles between the remote controller and the receiver of indoor unit otherwise
the air conditioner will not work.
2. Keep the Remote Controller away from any liquids.
3. Protect the remote controller from the high temperatures and exposure to radiation.
4. Keep the indoor receiver out of direct sunlight or the Air Conditioner may malfunction.
5. Keep Remote Controller away from EMI(Electro-Magnetic Interference) supplied by other household
appliances.
