30
ENGLISH
Air flow direction control
Adjust the air flow direction properly otherwise, it might
•
cause discomfort or cause uneven room temperatures.
Adjust the horizontal louver using the remote controller.
•
Adjust the vertical louver manually.
•
To set the vertical air flow (Up--Down) direction
Perform this function while the unit is in operation.
Use the remote controller to adjust the air flow direction. The
horizontal louver can be moved at a angle of 6º for each
press or set to move up and down automatically. Please
refer to the “REMOTE CONTROLLER ILLUSTRATION” for
details.
To set the horizontal air flow direction (left - right)
Adjust the vertical louver manually using the lever on the
left or right side of the vertical louver arm (Depending
on model). Take care not to catch fingers on the fan,
horizontal louver or to damage vertical louvers. When the air
conditioner is in operational and the horizontal louver is in a
specific position, move the lever at left (or right, depending
on model) end of the air outlet to the desired position.
CAUTION
The SWING and AIR DIRECTION button will
•
be disabled when the air conditioner is not in
operation(including when the TIMER ON is set).
Do not operate the air conditioner for long periods the
•
air flow direction set downward in cooling or dry mode.
Otherwise, may occur on the surface of the horizontal
louver causing moisture to drop on to the floor or on
furnishings.
Do not move the horizontal louver manually. Always
•
use the SWING or AIR DIRECTION button. If you
move this louver manually, it may malfunction during
operation. If the louver malfunctions, stop the air
conditioner once and restart it.
When the air conditioner is started immediately after it
•
was stopped, the horizontal louver might not move for
approximately 10 seconds.
Open angle of the horizontal louver should not be set
•
too small, as COOLING or HEATING performance may
be impaired due to too restricted air flow area.
Do not operate unit with horizontal louver in closed
•
position.
When the air conditioner is connected to power (initial
•
power), the horizontal louver may generate a sound for
10 seconds, this is a normal operation.
Range
Range
Lever
