Hiyasu 3NHY8690, Руководство по эксплуатации

Страница: 9 / 20

En-8
POWERFUL OPERATION
Used for quickly cooling or heating the room.
Begin Air Conditioner operation before performing this procedure.
To use POWERFUL Operation
Press the POWERFUL button (Fig. 5
L
).
To stop POWERFUL Operation
Press the POWERFUL button (Fig. 5
L
) again.
Normal operation begins.
About the POWERFUL Operation
Cooling/Dry
Using the maximum power, it cools the room to the approximate set temperature at one stroke.
● Powerful Operation mode is automatically turned off when the room temperature has fallen to the set temperature or when 20
minutes have passed after setting the POWERFUL Operation mode. However, it does not turn off automatically within a certain
time of setting the POWERFUL Operation mode.
Heating
Using the maximum power, it heats the room to the approximate set temperature at one stroke.
● Powerful Operation mode is automatically turned off when the room temperature has risen to the set temperature or when 20
minutes have passed after setting the POWERFUL Operation mode. However, it does not turn off automatically within a certain
time of setting the POWERFUL Operation mode.
● Wind direction and air fl ow rate are automatically set in POWERFUL Operation mode. Wind direction can be changed through
the wind direction adjustment button.
●
POWERFUL Operation and ECONOMY Operation modes can’t be set simultaneously.
The function whose button on the remote controller is last pressed will be given priority.
● POWERFUL Operation and OUTDOOR UNIT LOW NOISE Operation modes can’ be set simultaneously.
The function whose button on the remote controller is last pressed will be given priority.
ECONOMY OPERATION
Begin Air Conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the ECONOMY button (Fig.5
G
).
The ECONOMY indicator Lamp (green) (Fig. 3
7
) will light.
ECONOMY operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button (Fig.5
G
) again.
The ECONOMY Indicator Lamp (green) (Fig. 3
7
) will go out.
Normal operation begins.
About ECONOMY Operation
At the maximum output, ECONOMY Operation is approximately 70% of normal air conditioner operation for cooling and heating.
● If the room is not cooled (or heated) well during ECONOMY operation, select normal operation.
● Once air conditioner operation is stopped. Normal operation begins when the indoor unit is turned on again.
●
During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if
ECONOMY operation is selected by pressing the ECONOMY operation button.
● POWERFUL Operation and ECONOMY Operation modes can’ be set simultaneously.
The function whose button on the remote controller is last pressed will be given priority.
● Indicator Lamp
OPERATION
ECONOMY
TIMER
: Lighting : OFF
9332428001_OM.indb 8 9332428001_OM.indb 8 1/7/2011 12:00:41 PM 1/7/2011 12:00:41 PM