HD-SDI DVR HF-406 / 812 / 1612
70
<Reference>
If user wants to use Event recording only, please, set frame rate as 0fps and enter frame rate for Event
recording.
• Event applied time
To make event record user needs to setup record time for pre and post event. Event record range will be set
based on time set by user.
√ Record time before event
: User can select between 1~5sec and time ahead of event will be recorded as
much as time set by user.
√ Record time after event
: User can select between 1~30sec and time after event will be recorded as much
as time set by user.
2) Program Set up
Using [Program], adjust frame rate and quality configure
recording program for Continuous & Event, Manual &
Event, and Schedule & Event.
Select Program to configure frame rate & resolution.
For maximum performance, user can freely allocate the
recording resource per channel. This feature enables the
user to lower the recording performance of each
channels and allocate the remaining resources to raise
the recording performance of a specific channel or channels.
<Note>
1) For maximum recording, user should allocate recording resource only to the half of the DVR’s channels.
2) To double the recording performance, user should set recording frame as 0 in all even or odd channels.
- Program
There are 9 programs from A to I composing recording quality and resolution per channel.
- CH (Channel)
Display the channel No.
- Input Res
It shows resolution per camera connected to each channel.
MENU
RECORD
PROGRAM
