Hive Wasp 100-C, Руководство пользователя

Страница: 15 / 32

page 14
PANNING (HORIZONTAL ADJUSTMENT)
1. Loosen the mount lock on the yoke.
2. Freely adjust the light left to right up to a full 360°
horizontal rotation.
3. Secure the mount lock once desired angle is
reached.
SWITCHING LENSES
Your Wasp 100-C™ comes with 3 interchangeable HDP
Lenses: Medium, Wide and Super Wide. To affix these
to the device, follow these steps:
1. Rotate the top clip until it is parallel to the reflector
face
2. Slide the desired lens into the reflector cage’s inner
lens stage, or slot (pictured below).
3. Rotate the top clip back into its locked position.
4. Rotate lenses with elliptical beams in order to
position light projection in desired location.