3
2.2
PREPARATION FOR INSTALLATION
2. If applicable, move the sunshield by sliding it forward on the
main housing unit. Set the sunshield aside until needed.
3. Unlatch the lid and open the upper body.
4. Before closing the housing, remove the desiccant bag from
the protective packaging and place the desiccant bag inside
the housing to absorb moisture.
5. Locate the gold, panhead 1/4"-20 UNC screws and set them
aside for later use.
6. Continue with installation of additional components as needed.
If no additional components are installed, continue to
instructions for camera mounting.
OPEN
UNLATCH
LID