2
2. HOUSING INSTALLATION INSTRUCTIONS
2.1
CONTENTS OF PACKAGE
Remove the camera housing from the carton and verify that it
was not damaged in shipment.
The package includes:
1. Camera housing (including screws and washers)
2. Optional accessories and hardware
(varies by specific model purchased.)
3. Desiccant bag
4. UNC 1/4"-20 machine screws
5. Manual
2.2
PREPARATION FOR INSTALLATION
This section contains comprehensive instructions for installing
the heater kit and blower kit for the camera housing series.
These kits are sold as add-on components or are available in a
pre-assembled package. The MODEL A(B)-HB is a 10(12)-inch
camera housing with an installed sunshield, heater and blower.
After unpacking and identifying the package contents, perform
the following steps to mount the camera in the housing:
1. Locate the following items which may be needed during
installation but are NOT supplied with the enclosure:
•
Screwdriver
•
Camera and camera cable
•
Power supply