11
2.5 SUNSHIELD
INSTALLATION
This section contains instructions for installing the sunshield for
the camera housing series. The sunshield is sold as an optional
component and is also available in a pre-assembled package.
The MODEL A(B) is the pre-assembled camera housing and
sunshield combination.
1. After the camera is installed and the housing is reassembled,
install the sunshield by sliding it across the top of the housing
unit. (Begin at the front of the housing.)
2. To mount the completed assembly, refer to the bracket
mounting instructions.
2.6
WALL BRACKET MOUNTING
This section contains instructions for mounting the recommended
wall bracket (sold separately).
Be sure that the camera and optional components have been
properly installed before proceeding with the mounting
instructions.
1. Use fasteners of appropriate size and type to attach the
bracket to the wall surface. Position the housing so that it
allows for viewing of the selected area.
2.
Locate two nuts that freely slide along the channel. Position
the nuts approximately 2 inches from each other.
3. Place the housing onto the mount, aligning the holes. Insert
the two provided 1/4"-20 UNC screws through the mount and
into the nuts. Secure the assembly.