29
IOM_ACVBA-ACVA_351a2402_207958_180109_EN
ACVBA-ACVA
PACKAGED VERTICAL COMPACT UNITS
AIR-AIR
OPTIONAL
EC MOTOR FANS
Safety instructions
Explanations of symbols
Safety instructions are highlighted with warning triangles and are depicted according to the degree of hazard as follows.
Attention!
General hazardous area. Death or severe injury or significant property damage can
occur if the corresponding precautions are not taken!
Danger due to electric current
High voltage danger! Important damages may occur if appropriate precautions are
not taken. Risk of death!
Information
Important additional information and advice for user.
Product safety
The device complies with the valid technical standard at the time of delivery and is fundamentally considered as safe. The
device and its accessories can only be installed and used if they are in perfect condition and when the installation guidelines
as well as the manufacturer user instructions are followed. A use that does not match the technical specifications must
only be used in a flawless condition and installed and operated in compliance with the assembly instructions and/or
operating instructions. Operating outside the device’s technical specifications (rating plate and attachment /technical data)
can lead to a default of the equipment and may entail additional damages!
Requirements placed on the personnel / due diligence
The people involved in the planning, installation, commissioning, maintenance and servicing of the equipment must have
the needed qualifications and skills for these activities.
Moreover they are expected to be informed of the security rules, the CE standards, the rules for the prevention of accidents
and the corresponding national as well as regional and in-house regulations. Personnel to be trained or instructed and
apprentices are only permitted to work on the device under the supervision of an experienced person. This also applies to
personnel undergoing general training. Comply with the legal minimum age.
Working on the device
Information
Mounting, electrical connection, and start-up operation may only be carried out by an
electrical specialist in accordance with electrotechnical regulations (e.g. EN 50110 or
EN 60204)!
WARNING!
