HITEC X1 AC Plus, Инструкция по эксплуатации

Страница: 20 / 36

20
Press the
►
button once to enter the “
CHARGE
“ screen.
Now use the
✚
or
▬
buttons to change from “
CHARGE
“
mode to “
DISCHARGE
“. Press the
►
button again and the amp rate value will
begin fl ashing. Use the
✚
or
▬
buttons to adjust the value to the desired rate.
Follow the instructions provided with your battery when setting the amp rate.
Press the
►
button again and the voltage value will begin fl ashing. Use the
✚
or
▬
buttons to adjust the value to the desired rate. The voltage and cell count
should match the values listed on the battery label.
Press and hold the
►
button and discharging will begin.
Once discharging has commenced, the charger will
display the following real-time information: Battery
type/cell count, discharging current, battery voltage, discharging time and
discharged capactiy.
DURING CHARGING/DISCHARGING, THE BATTERY SHOULD BE PLACED
INSIDE A FIRE PROOF/RETARDANT BAG AND ON A FIRE PROOF SUR-
FACE, AWAY FROM OTHER COMBUSTIBLE OBJECTS.
If you are using a balance adapter, you may press the
✚
button to view the voltage of each individual cell.
Once discharging is complete, the X1 charger will emit a chiming sound. Press
the
■
button at any time to stop discharging.
Lithium Discharge Mode (cont.)
Lithium
Li3s 1.2A 12.69V
DSC 022:43 00682
LiPo STORAGE
0.1A 3.7V(1S)
Caution
4.09 4.09V 4.09V
0.00 0.00V 0.00V
See page 12 for the appropriate charging connections setup for this operation.
First, select the correct battery type by following the instructions on page 13.
Once you have set the correct battery type, press the
■
button once to return
to the “
USER SET PROGRAM->
“ screen. Press the
■
button again to enter the
“
PROGRAM SELECT
“ screen. On this screen you should
see the type of battery you have selected.
PROGRAM SELECT
LiPo BATT