HITEC Flash 8, Инструкция по эксплуатации

Страница: 30 / 59

56 57
PROG.MIX cont.
23. Scroll to highlight the “TRIM” field and press the jog dial to
activate the menu. With this feature enabled, the slave
feature will respond to trim changes as well as control inputs
for the master feature. When disabled, the slave feature
ignores trim changes and reacts only with control inputs to
the master feature.
24. Rotate the jog dial to select “OFF or “ON” and press the jog
dial to confirm your input.
See the “D/R & EXP” menu on page 49 for more information about exponential rates.
Tip Tip
Tip
You may also select a fl ight condition in this menu by activating the desired fl ight condition.
Tip Tip
Tip
18. Select neutral sensitivity with jog dial and press the
jog dial to confirm setting.
19. Scroll to highlight “OST” and press the jog dial to activate
the menu.
20. Use the jog dial to set the Offset value (increase or decrease)
of the servo, then press the jog dial to confirm setting.
21. scroll to highlight “SPEED” and press the jog dial to
activate the menu.
22. Use the jog dial to set the speed of slaver servo,
then press the jog dial to confirm setting.
PROG.MIX cont.
26. Press the jog dial again to enable selections in the S/W menu.
27. Scroll to select the switch that you will use to activate the
mix and press the jog dial to confirm your selection. If “NULL”
is selected, the mix will always be active.
28. If you selected a switch, the switch position menu will
appear. Scroll to highlight the switch position(s) that you
will use to enable the mix. Press the jog dial to confirm your
selection.
30. Set up accordance with Flight Condition
- The upper right fi eld of the menu displays which fl ight
condition is currently active and will be programmed.
- Scroll to the Flight Condition fi eld and press the jog dial to
activate the menu.
- Choose the desired fl ight condition and press the jog dial to
confi rm your selection
- Repeat steps 9-24 to defi ne the settings for each fl ight condition.
31. Press the back button to return to the model function menu.
31. To inhibit this mix, scroll to the “MIX” field and press the jog
dial to activate the menu.
32. Scroll to select “INH” and press the jog dial to confirm your
selection.
33. Press the back button twice to return to the model function
menu.
29. Scroll to select “ON” and press the jog dial to confirm your
selection. If you toggle the selected switch, the field in the
top right corner of the screen will indicate if the mix is on or
off.
30. Press the back button to return to the programmable mix
sub-menu.
25. Scroll to highlight “S/W” and press the jog dial to activate the
menu.