>> search
Home
Products
Transmitters
Servos
Receivers
Accessories
Support
Contact Us
Where To Buy
Support
Product Support
FAQs
Radios
Flash 5
Flash 5
Flash 5 SX FAQ
How can I change the frequency on my transmitter?
Is my transmitters trainer function compatible with any other manufacturer's radio?
Why doesn't my elevator trim work?
When I set the end point on my servo, it will only affect one direction.
Why do the centers on my servo move when I switch from high to low dual rate?
What other receivers will my Flash work with?
What is the maximum range of the Flash transmitter?
How do I do a range check?
When I use elevon mixing, how do I adjust the throw of the elevator only?
Does Hitec make the Flash System X radios in the Ham Band?
Will this do full house sailplanes?
When I enable aileron/rudder mix, the rudder only moves in one direction when the
aileron stick is moved?
When I enable the ELEVON mix, my elevator behaves like a aileron and visa versa.
Why won't my receiver work with My Flash when I have the EPA and Dual Rates at
125%?
How do I use my transmitter in a buddy situation?
Q. How can I change the frequency on my transmitter?
A.
You will have to send the transmitter to our service department to have the frequency changed.
The total cost is $14.95. This price includes shipping.
<Back>
Q. Is my transmitters trainer function compatible with any other manufacturer's radio?
A.
Hitec radios are trainer compatible with Hitec and Futaba systems. Use only the Hitec one-way
trainer cord (PN 58310). Be aware you will need a comparable radio to use any mixing functions.
<Back>
Q. Why doesn't my elevator trim work?
A.
The radio is probably set to stick mode 1. To check this, go into the main menu and scroll to the
screen with an "St". If there is a 1 above the letters then you are in stick mode 1. Press the cut
button to change to stick mode 2. Page 11 of your manual will explain this procedure in more
Hitec RCD : Pages
file:///C:/DOCUME~1/Alan/LOCALS~1/Temp/maftemp-e87516b0/1358...
1 of 3
24/01/2013 10:55 a.m.
