HITEC Aurora 9X, Инструкция по эксплуатации

Страница: 109 / 144

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
109
CAMBMIX (ACRO and GLID)
e. The Aurora 9X offers a 7 point curve on many
of our adjustable mix menu items. To adjust the
travel values, move the corresponding control
stick or slider to align the moving line with the
point you wish to adjust. Press the + or - icon to
adjust to the desired curve points. If you wish to
inhibit any curve points, press the RST icon. It is
necessary to inhibit the #2, 3, 5 and 6 points,
and to just adjust points 1 and 7 equally to
achieve a linear curve.
f. Input a movement value using the +RST- icon.
g. Repeat this process until the ailerons,
flaps and elevator flight control channels
all move where you want them too.
h. Select the Exit icon to return to the model menu.
a. Select the CAMBMIX icon from the model menu.
b. Press ACT to activate the Camber mix menu.
c. The first decision is where to place the camber mix function control. We suggest the default of the RS (right slider) to begin with.
You can change it later if you wish by selecting the
arrow on the top line of the screen and selecting another control for the camber mix.
Switch Option and In–Flight Fine Trim Adjustment Switch Function
d. To select a 2 position switch that will turn the mix on and off and to select an “in-flight” ADJUSTMENT switch, press NULL and follow
the switch activation process.
Switch type Function VR adjustment
2 position On or Off Fine tuning control choice
Wing Trailing Edge Camber Mix.
Mix the ailerons, flaps and elevator onto an Aurora control with the Camber mix feature.
Provide one switch or variable control to lower and raise the trailing edge while using elevator compensation.
### This function can be influenced by the flight condition feature ###
The Camber Mix feature has a second screen in the adjustment menu allowing you to set adjustment travel rate values for
all the different control surfaces.
Note