HITEC Aurora 9X, Инструкция по эксплуатации

Страница: 100 / 144

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
100
FLT.COND (ACRO and GLID)
Trim link and condition speed can be adjusted on the flight condition list screen for NORMAL condition. Change the trim link and
condition activation speed for all other flight conditions on their respective switch select screens.
Note
C and S, Combination and Separate “movement value” set-ups.
This is a huge feature. Take the time to understand it, as using the C and S option will expand the Aurora 9X’s capability
in a dramatic way.
When you have several different flight modes set-up, as you program control surface movement values into any of the
following features, you can choose to have those values be associated with the C or S icon. This means:
t5IF$WBMVFTXJMMXPSLJO combination with all other features with a C value.
t5IF4WBMVFTXJMMXPSL separately from the C value functions.
3. Add more flight conditions and apply them to other switches.
Follow section b through k as noted previously in this section.
4. Change the selected flight conditions priority
When two or more flight modes are programmed, you may change their priority by selecting the flight condition to change, and
pressing the
arrow on the Prior icon bar.
6. Add a time delay to the activation of the flight conditions.
Most users will desire a flight condition to be smoothly applied and retracted. Adjust the condition speed with the Speed : 0 icon
using the
+RST- icons.
Applying the C or S option to any feature with a flight condition option, multiplies the capability of the Aurora.
The default for all features will be the C values. As with most of the Auroras features, experimentation is encouraged as
experience is truly the best teacher.
{— {—
Tip
Press C to change it to S (Separately) Press S to change it to C (Combination)
5. Decide if you want the added flight conditions to have a “trim link”.
To fine tune the movement values of a flight condition, you may want the trim to be changeable, or to follow the other flight modes.
This is done at the T.LINK: INH arrow icon. Pressing the arrow will toggle between INH and ACT to inhibit or activate the trim link
function for the selected flight condition.