English
33
BATTERY REMOVAL / INSTALLATION
1. Battery
removal
Hold the handle tightly and push the battery latches
to remove the battery (see
Fig. 3, 4
).
CAUTION
Never short-circuit the battery.
2. Battery
installation
Insert the battery while observing its polarities
(see
Fig. 4
).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle, the charge indicator lamp will
blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 5
.
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green.(See
Table 2
)
Fig. 3
Battery
Latch
Ventilation holes
Terminals
Battery cover
Handle
Latch
Battery
Pull out
Insert
Push
Fig. 4
Battery
Guide rail
Charge
indicator lamp
Fig. 5
000Book̲WH14DBDL2̲ChS.indb 33
000Book̲WH14DBDL2̲ChS.indb 33
2017/12/07 18:05:00
2017/12/07 18:05:00
