Hitachi WH 12DH Скачать руководство пользователя страница 30

Страница: 30 / 41

--- 27 ---

Remove the hammer assembly from the J-297 base for washer (S) and support the end surface of the Spindle

[15] <13>. With a hand press, push down either of the raised faces of the Hammer [10] <7> to compress the

Spring [12] <10>. In this position, extract the two Steel Balls D5.556 [9] <6> from the cam grooves of the

Spindle [15] <13> and the Hammer [10] <7> with a small flat-blade screwdriver or a similar tool. Then, slowly

release the hand press and lift the Hammer [10] <7> and Washer (S) [13] <11> together to extract them from

the Spindle [15] <13>. The Spring [12] <10> can then be removed.

Steel ball
guide groove

Spindle [15] <13>

Hammer [10] <7>

Raised faces
of hammer

Top of spindle cam

Steel Ball [9] <6>

Fig. 11

10-1-2. Reassembly

Reassembly can be accomplished by following the disassembly procedures in reverse. However, special

attention should be given to the following items.

(1) Reassembly of Housing (A) assembly

(a) Be sure to follow the wiring diagram (Fig. 12-1) for proper wiring.

(b) When connecting the internal wires of the Motor [23] <21> to the DC-Speed Control Switch [30] <28>,

tightly fasten them with the Machine Screw M3 x 5 [29] <27> paying close attention to the direction of the

flag terminal (Fig. 12-2).

preventing motor body from rotating fit in Housing (A).

(Note) Make sure that the internal wire (purple) is passed under the Motor so that it is not caught between

the Motor and Housing (A).

(d) Mount the DC-Speed Control Switch [30] <28> to Housing (A) so that the projection of the forwarding/

reversing lever at the top of the Switch is inserted into the U-shaped groove of the Pushing Button [31]

<29>. Secure the Fin Ass'y [32] <30> to the FET of the DC-Speed Control Switch [30] <28> with the S-

Tight Screw D3.5 x 6 [36] <34>.

(Note) Make sure that the three internal wires from the FET are passed above the DC-Speed Control

Switch [30] <28>.

(2) Reassembly of the Housing (A).(B) Set [28] <26>

Mount the Strap [35] <33>, Grip (F) [33] <31>, Grip (R) [37] <35> and Housing (B) to Housing (A), and secure

them with the seven Tapping Screws D4 x 20 [26] <24>.

Содержание WH 12DH










































Результаты поиска

Содержание WH 12DH

Отзывы:

Похожие инструкции для WH 12DH

Бренды по названию

Популярные бренды

Hitachi WH 12DH, Технические данные и руководство по обслуживанию

Результаты поиска

Содержание WH 12DH

Отзывы:

Похожие инструкции для WH 12DH

Бренды по названию

Популярные бренды