Switching on
You can switch on the video recorder with the
STANDBY
m
button, the number buttons
0-9
or by
putting in a cassette.
Automatic switch-off
If the video recorder is not used for several minutes, it
switches itself off automatically. This function can be
deactivated (e.g. if you want to use the video recorder as a
TV receiver). For more information, please read the section
'Automatic switch-off' in chapter 'Additional functions'.
Time in the display
If you have switched the video recorder off with
STANDBY
m
, the time will show in the display, e.g.
'18:00'.
If the clock has not been set, '
--:--
' will appear.
Energy consumption
The video recorder should always be connected to the
mains so as not to affect the use of the TV or programmed
recordings.
Power consumption is less than 4W.
Power outage/no power
Channel information remains saved for up to 1 year, the
time and timer information is saved for up to 3 hours.
Emergency exit
The video recorder and the remote control have the option
of an 'Emergency exit'. You can use the
STANDBY
m
button to interrupt any function or step during use.
You can operate your device without worry. There is no risk
whatsoever of damaging the video recorder by performing
user steps incorrectly.
The symbols on your video recorder
display
These symbols can light up on your video recorder display:
This is where the current operating mode is
shown as a symbol.
LP
When you have switched on the LP (Long Play)
function or when you play a tape that has been
recorded in LP (Long Play).
When you have switched on the child lock.
When you are making a recording.
k
When you have programmed a recording or
when a programmed recording is being made.
When you have put a cassette in the video
recorder.
DATE
When the date of the programmed recording is
shown.
START
When the start time of the programmed
recording is shown.
PROG.
When the programme number of the
programmed recording is shown.
END
When the end time of the programmed recording
is shown.
Display of programme number of the TV channel
/ tape position / channel name / function.
Tape position in seconds.
3.
Important notes for operation
11
