Hitachi VSP E590 Скачать руководство пользователя страница 2

Страница: 2 / 18

mounting holes and rear-facing power distribution units (PDUs).

For information about installing the controller in a third-party rack, see the documentation for that rack.
NoteThe rail kit comes with pins that will fit racks with square or circular shaped holes. Use the correct pin type for your
rack.

Number

Item

Pin for square holes

Pin for round holes

Before you begin

• Make sure the rack is secure and cannot fall over.

• Make sure the rack has one or more PDUs installed.

• Verify that all power cables are removed from the AC power receptacles on the rear of the controller.

• Install the rack stabilizers before mounting the storage system in the rack.

Procedure

https://knowledge.hitachivantara.com/Documents/Storage/VSP_E_Series/93-04-0x/Installation/Installing_your_VSP_E590_an…

Updated: Thu, 06 Jan 2022 00:49:25 GMT

Содержание VSP E590



















Результаты поиска

Содержание VSP E590

Отзывы:

Похожие инструкции для VSP E590

Бренды по названию

Популярные бренды

Hitachi VSP E590, Установка

Результаты поиска

Содержание VSP E590

Отзывы:

Похожие инструкции для VSP E590

Бренды по названию

Популярные бренды