background image

IMPORTANT SAFEGUARDS 

IMPORTANT SAFEGUARDS 

 

 

 

 

 

 

 

 

In addition to the careful attention devoted to quality standards in the manufacture of 
your video product, safety is a major factor in the design of every instrument.  But, 
safety is your responsibility too. 
This page lists important information that will help to assure your enjoyment and proper 
use of a Video Camera/Recorder and accessory equipment.  Please read it carefully 
before operating your video product and keep it in a handy place for future reference. 

INSTALLATION 

Read and Follow Instructions -- All the safety and operating instructions should be 
read before the video product is operated.  Follow all operating and use instructions. 

 

2  Retain Instructions -- The safety and operating instructions should be retained for 
future reference. 
3  Heed Warnings -- Comply with all warnings on the video product and in the 
operating instructions. 
4  Polarized Plug -- This video product is equipped with a polarized alternating-
current line plug (a plug having one blade wider than the other). This plug will fit into 
the power outlet only one way. This is a safety feature. If you are unable to insert the 
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, 
contact your electrician to replace your obsolete outlet. To prevent electric shock do 
not use this polarized plug with an extension cord, receptacle or other outlet unless 
the blades can be fully inserted without blade exposure. If you need an extension, 
use a polarized cord. 

 

5  Power Sources -- This video product should be operated only from the type of 
power source indicated on the marking label. If you are not sure of the type of power 
supply to your home, consult your video dealer or local power company. For video 
products intended to operate from battery power, or other sources, refer to the 
operating instructions. 
6  Overloading -- Do not overload wall outlets and extension cords as this can result 
in a risk of fire or electric shock. Overloaded AC outlets and extension cords are 
dangerous, and so are frayed power cords, damaged or cracked wire insulation and 
broken plugs. They may result in a shock or fire hazard. Periodically examine the 
cord and have it replaced by your service technician if appearance indicates damage 
or deteriorated insulation. 
 

Содержание VM-SPIA























































































Отзывы: