High Speed Dome Camera User’s Manual
- 6 -
Automatic Reversal
If the operator pulling rocker when the lens appoint the bottom, the lens will horizontal whirl 180 º
automatically and whirl 90º upwards, user can watch the views on the back side, so it can realize the 180 º
entire journey surveillance
.
To realize the function, you need set the “Automatic reversal” in the OSD to
ON.
Timing Automatic Activation
If the camera’s not carrying out any operation by using “spare time activation” function, the user can set
auto transfer preset or start cruise, self-leaning or limited scan.
Automatic Activation
By using “restart”, the user can set automatic activation and the camera will recover to the operation before
electrify after electrify or restart, it also can be set auto transfer preset or start cruise, self-leaning or limited
scan.
3.3 Camera Control
Magnification Times Control
Through the button named “Three dimension button” or “Wide” and “Tele” button on the keyboard, you can
adjust to full view or close-up view. Dome camera supports digital PTZ and optics PTZ, and digital PTZ can
be settled.
Focus Control
System uses auto focus as tacitly approved. When lens change, camera can focus on the view
automatically to keep the view clear. Through “FAR/NEAR”, users can adjust it manually in order to have
the view you want. When use the keyboard, camera can be back to automatic focusing.
On these conditions, camera can not focus automatically:
Target not in the centre of view
Observe close view and distant view at the same time, cannot guarantee both of them are clear
Target is as high light materials. Such as neon lamp, spotlight and any shine objects
Target moves so fast
Big size dull target, such as wall
Target is too dark or not clear
Target view is too small
Iris Control
System uses auto Iris as tacitly approved. It can feel the light around to adjust the iris to keep the output
view’s luminosity steady.
Users can use “Open/Close” button on the keyboard, adjust the iris manually to get the fittest luminosity. It
can be back to automatic iris by using the keyboard.
Face Away from Light Compensating
Camera district fulfill facing away from light compensating automatically. Under high light background, it
will automatically compensate to the light, and adjust the light to the fittest view. This method can avoid
whole view with more light, and make the target view more clearly.
Auto White Balance
Automatic adjust based on the changing of light around, to appear the true color.
3.4 Monitor Function
Set/adjust preset point
Preset point function is that record the data of horizontal angle, tilt angle and focal distance of camera to
the memory. When need, you can use these data to the position. Preset point can be set quickly and easily
by using keyboard, you can set two hundred twenty preset points.
