Number
Item
Description
Blink red: Failure with the
power supply unit of the
controller.
Amber: LAN reset switch
was pressed.
9
LAN-RST switch
Use only when instructed
by customer support.
10
STATUS
LED (for BKMF)
Green: Charging of the
battery in the backup
module is complete.
Red: Backup module can
be removed.
Blink red one time: Main
battery failure.
Blink red two times:
Backup battery failure.
Blink red three times: Both
batteries failed or
preventive maintenance
replacement of batteries
can run.
Off: Battery is not
mounted, battery-
mounting failure occurred,
or firmware is being
upgraded. Off is normal
status for configurations
without batteries (for
example, BKMF-10 and
BKMF-20).
CBLH rear panel
The following table describes the definitions of the CBLH controller rear panel LEDs.
CBLH rear panel
Chapter 2: Virtual Storage Platform G800 controller
Hitachi Virtual Storage Platform G800 Hardware Reference Guide
21