Hitachi Virtual Storage Platform F400, Руководство системного администратора, Страница: 56 / 368

Tip: You do not have to enter Time and Date because the settings are
acquired from the NTP server.
6. Click OK .
The window changes to the Login window a few minutes later.
Miscellaneous system administration considerations
Modifying SVP port numbers
You can change SVP port numbers to any arbitrary number. This is optional. You can also
initialize the settings to the original status by initializing the port number.
For SVP
firmware 83-03-01- XX /00 or later, some ports are automatically assigned unused
port numbers.
You can change the automatically assigned port numbers:
■
To check automatically assigned port numbers, see Viewing the port number used in
SVP (on page 57) .
■
To change an automatically assigned port number, see Reassigning an automatically
assigned port number (on page 61) .
■
To return a port to its automatically assigned port number, see Initializing and
reassigning an automatically assigned port number (on page 62) .
■
To change the range of port numbers used for automatic assignment, see Changing
the range of an automatically assigned port number (on page 62) .
■
To return the range of port number for automatic assignment to its original range,
see Initializing the range of an automatically assigned port number (on page 63) .
Note: Perform this task only if an SVP port number is used by another
application.
You need to verify the effects before you modify an SVP port number. See Effects of
changing service processor port number (on page 58) .
The following table describes the port number key names and the initial value of the port
number.
Port number key
name Protocol
Initial port
number
Corresponding SVP
software version
MAPPWebServer HTTP 80 83-01-20- XX /00 or later
MAPPWebServerH
ttps
HTTPS 443 83-01-20- XX /00 or later
RMIClassLoader RMI 51099 83-01-20- XX /00 or later
RMIClassLoaderHt
tps
RMI (SSL) 5443 83-01-20- XX /00 or later
Miscellaneous system administration considerations
Chapter 3: Configuring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 56