Procedure
1.
Open the Windows command prompt as administrator on the SVP.
2.
In the folder where the .bat
file
is located, execute the following command:
C:\MAPP\wk\Supervisor\MappIniSet>MappPortRangeSet.bat
port-number-
key-name
port-number-range
Note:
■
A space is required between
MappPortRangeSet.bat
and
port-
number-key-name
.
■
A space is required between
port-number-key-name
and
port-number-
range
.
The following table shows the port number key name and initial value of the port
number range which can be changed. Port 0 is not assigned.
Port number key name
Initial value of port
number range
Remark
PreRMIServer
51100 to 51355
None
SMIS_CIMOM
5989 to 6244
None
DeviceJettyStart
48081 to 48336
None
DeviceJettyStop
48411 to 48666
None
unavailable
1 to 1023
Port number that is not
used in automatic assign
■
The valid range of the port number is between 1 and 65535. Use a port number
that is not used in another service.
■
Port numbers between 1 and 1023 are reserved for the other applications. If you
exclude a number between 1 and 1023 from the setting value of unavailable, the
port numbers might not operate normally.
■
The following can be used for the port number range:
Numbers, space, symbols (, -) and rm
■
You can specify multiple
port-number-key-name
and
port-number-range
.
For example:
MappPortRangeSet.bat PreRMIServer 51200-55000
SMIS_CIMOM 5989-6244,8000
3.
Press any key to acknowledge the message and close the message box.
4.
Close the Windows command prompt.
Initializing the range of an automatically assigned port number
You can initialize the range of the port number that is automatically assigned to the
storage system.
Initializing the range of an automatically assigned port number
Chapter 3:
Configuring
the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models
63
Содержание Virtual Storage Platform F400
