Hitachi VF-PBM307, Руководство по эксплуатации

Страница: 6 / 34

Page 6 of 32
7. Attachments : Do not use attachments not recommended by HITACHI and PLURA Broadcast Inc.
as they may cause hazards.
8. Ventilation : Do not block any of the ventilation openings.
9. Install in accordance with these instructions.
10. Power Sources : This product should be operated only using the type of power source indicated
on the marking label. If you are not sure of the type of power supply, consult your dealer.
11. Servicing : Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltages or other hazards. Refer all servicing to qualified service
personnel.
12. Safety Check : Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating
condition and the front seal is intact.
13. Mounting : The product should be mounted using the appropriate and recommended camera
accessories which are offered with this product.
14. Power : This set operates on DC through 20 PIN VF cable supplied; 12VDC. This product is
grounded to the camera’s chassis potential at all times through the VC-90A supplied cable.