Hitachi VB 16Y, Технические данные и руководство по обслуживанию

Страница: 15 / 29

--- 12 ---
Fig. 15
Fig. 16
[12]
[17]
[10]
[86]
[12]
Align with the end
surface of the cam.
J-321 final gear puller
Press the end surface of the
cam shaft with a hand press.
Push up bracket (A) unit.
Flatblade screwdriver
(d) Removal of the Final Gear [17] (Fig. 15)
The Final Gear [17] is press-fitted in the Cam Shaft [12]. Remove the Final Gear [17] from the Cam Shaft
[12] with the J-321 final gear puller by pressing the end surface of the cam shaft with a hand press as
shown in Fig. 15.
(6) Removal of the cam shaft unit (Fig. 16)
Push up bracket (A) unit in the arrow direction with a flatblade screwdriver and remove the cam shaft unit and
sleeve (B) unit.