Structure mechanism and Installation
•
Installation Steps
Step 1. Remove the front panel and the air filter
1.
Hold the slot under the front panel, then uplift outwards, and remove the front panel
(See Fig. 1).
2.
Pinch the handle under the air filter and make the air filter arched, remove it from the
slot from
unders ide
to upside (See
F ig.
2).
3.
Cut and remove the cable tie (See Fig. 3) fixing between the panel and the temperature
sensor behind the air filter. (Only applicable for RAW-VJ18SCASK and
RAW-VJ24SCASK).
Step 2. Remove the frame.
1.
Remove one screw on the chassis fixing bracket, then remove the chassis fixing bracket.
Remove the two screws located on the back of the cabinet as shown in Fig. 4 if
necessary.
2.
Grasp the left corner of the frame’s underside, then loosen the frame
. (See Fig. 5).
After that use a flathead screwdriver to press the clip connecting between the control
panel and the frame, finally remove the frame.
3.
Grasp the handle on t
he chassis and carefully silde
the air condition
e
r
out of th
e
cabin et
(See Fig.
6).
Rubber Plug is fixed in the drain hole. Please use the spare rubber plug
given into the package if necessary.
Step 3. Install the frame.
1.
Push the
unit chassis into the
cabine t
(S ee
Fig. 7).
2.
Install the
frame
(See
Fig. 8) and fix the sc
r ews
on the
fram
e
(See
Fig. 4)
Step 4. Install the air filter and front panel.
1.
Install the Silver Ion air filter into the
frame's slot from upside
to underside. (
See
Fig. 9).
2.
Hang the
front
panel
on th
e
fram e'
s
buckle
,
the
n
pr ess
the
front
pane l
into the
fram e's
slot
untiI you
he ar
a click
(S ee
Fig. 10)
-
9 -
Содержание UTOPIA R410A Series
Страница 2: ......