Hitachi UTOPIA R410A Series, Инструкция по установке и эксплуатации

Страница: 11 / 25

Removal
Before removing air conditioner to the other place, you
should contact the seller firstly.
Then it must be done under the direction of the
professional technician.
Noise
•
Install in a location where is firm enough to avoid the
enlargement of noise and vibration.
•
Don’t put anything in front of the outlet of the unit to
avoid enlarging noise.
•
Be sure that hot air or noise will not cause
inconvenience to neighbors.
•
Please contact the seller as soon as there is strange
noise during operation. Please use the safety support.
Electric Wiring
•
Must connect with ground reliably.
• The exclusive circuit must be used. Removable
socket can’t be used because of poor contact. It
can cause overheat or fire.
•
Don’t pull the power cord strongly.
•
In fixed circuit, there must be electricity leakage
protection switch and leakage current is less than
30 mA.
•
Switch (circuit breaker) should be installed in the
circuit and its capacity are 15 A (RAW-VJ07SCASK,
RAW-VJ10SCASK and RAW-VJ13SCASK), and 30 A
(RAW-VJ18SCASK and RAW-VJ24SCASK)
-
8 -
Structure mechanism and Installation
•
Notes for installation