Hitachi UR 18DSAL, Инструкция по эксплуатации

Страница: 7 / 188

7
English
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/EC
on waste electrical and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
Power button
Source select button
Menu button
Enter / Information button
Volume button
Search button
Select button
Buzzer alarm indicator
Radio ON alarm indicator
Battery exhausted indicator
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
○ AC adapter ....................................................................1
○ AA batteries ..................................................................2
○ Recharge cable holder ..................................................1
(for Apple Lightning connector)
* Android holder is built into the main unit.
Standard accessories are subject to change without notice.
PRIOR TO OPERATION
●
Installing backup batteries
Time settings and radio station frequencies can be saved by
installing batteries in the unit.
1. To access the storage box for the backup batteries,
unlatch the tab and open the rear cover. ( Fig. 1 )
2. Open the backup battery storage box and insert the
two AA batteries (included) into the storage box in the
direction indicated. ( Fig. 2 )
NOTE
○ Do not reverse battery polarity (+/-) when installing the
batteries.
○ Do not mix old and new batteries. Always replace both
batteries at the same time.
○ Do not burn batteries or dispose them as household
waste.
●
AC adapter installation
Power can be supplied by plugging the AC adapter
(included) into a standard household outlet.
Pull back the rubber cover and connect the AC adapter to
the AC adapter port. ( Fig. 3 )
Next, plug the AC adapter into an electrical outlet.
NOTE
○ When used together with the batteries, the AC adapter
is the main power source and no battery power is
consumed.
○ When used together with the AC adapter, the batteries
will not recharge as this device has no recharge function.
Storing the AC adapter
The AC adapter can be stored in the compartment behind
the rear cover. ( Fig. 4 )
●
Battery installation
CAUTION
Do not touch the terminals.
Doing so may result in cuts to the hand or other injuries.
Only a 14.4 V or 18 V slide-type battery can be used with
this device.
Installing the battery
Open the rear cover, align the battery with the grooves of this
device and slide it all the way in. ( Fig. 5 )
NOTE
○ Do not apply any excessive pressure when inserting the
battery. If the battery does not easily slide into place, it is
not being inserted properly.
Check to see if the battery is facing the correct direction
and that there is nothing obstructing the path of insertion.
○ If is displayed when the device is switched on
following battery installation, the battery charge is low.
In this situation, either use the AC adapter or install a fully
charged battery.
●
Changing the date display
The following selections are available for date display.
YYYY/MM/DD (Year/Month/Day)
MM/DD/YYYY (Month/Day/Year)
DD/MM/YYYY (Day/Month/Year)
1. Press the Menu button.
2. Press the Select button and display “DATE DISP”.
DATE DISP
3. Press the Enter / Information button.
4. Press the Select button and display the date display
selection of your choice.
YYYY/MM/DD
5. Press the Enter / Information button.
●
Set the date
Using the control panel, follow the steps below to set up the
date.
1. Press the Menu button.
2. Press the Select button and display “DATE ADJ”.
DATE ADJ
3. Press the Enter / Information button.
0000Book̲UR18DSAL.indb 7 0000Book̲UR18DSAL.indb 7 2015/05/08 14:28:22 2015/05/08 14:28:22