Hitachi U-2810, Инструкция по эксплуатации

Страница: 49 / 63

4.3.3 4.3.3
4 - 5 4 - 5
Table Table 4-5 4-5 Instrument Instrument Tab Tab
Parameter Setting Parameter Setting
Data Data mode mode Abs Abs
Start Start Wavelength Wavelength (nm) (nm) 950 950
End End Wavelength Wavelength (nm) (nm) 200 200
Scan Scan speed speed (nm/min) (nm/min) 400 400
Response Medium Response Medium
Baseline Baseline correction correction User User
Delay Delay (s) (s) 0 0
Zero measurement before Zero measurement before
each run
each run
Off Off
Lamp Lamp source source Auto Auto
Lamp Lamp change change 340 340
Replicates 1 Replicates 1
Path Path length length 10 10
(4) (4) Set the Set the parameters parameters on the on the Monitor Monitor tab p tab page a age as sho s shown in wn in
Table 4-6. Table 4-6.
Table Table 4-6 4-6 Monitor Monitor Tab Tab
Parameter Setting Parameter Setting
Max -0.005 Max -0.005
Min +0.005 Min +0.005
Open data processing window Open data processing window
after acquisition
after acquisition
On On
Open data processing window Open data processing window
after
after acquisition(Ove acquisition(Overlay) rlay)
Off Off
Print Print report report after after data data acquisition acquisition Off Off
Overlay Off Overlay Off
(5) (5) Set Set the parameters the parameters on on the the Processing tab Processing tab page page as as shown shown in in
Table 4-7. Table 4-7.
Table Table 4-7 4-7 Processing Processing Tab Tab
Parameter Setting Parameter Setting
Average Replica Average Replicate te - (masking) - (masking)
Processing Processing choices choices None None
Peak Peak Finding Finding Rectangular Rectangular
Threshold Threshold (Abs) (Abs) 0.001 0.001