Hitachi S10 Series, Руководство пользователя

Страница: 23 / 53

S10 Series SIO Driver
GP-Pro EX Device/PLC Connection Manual
23
5 Cable Diagram
The cable diagram shown below may be different from the cable diagram recommended by Hitachi, Ltd..
Please be assured there is no operational problem in applying the cable diagram shown in this manual.
• The FG pin of the main body of the External Device must be D-class grounded. Please refer to the manual of
the External Device for more details.
• SG and FG are connected inside the Display. When connecting SG to the External Device, design the system
not to form short-circuit loop.
• If the communication is not stable due to the noise or other factors, connect the isolation unit.
Cable Diagram 1
Display
(Connection Port)
Cable Remarks
GP3000
*1
(COM1)
AGP-3302B (COM2)
GP-4*01TM (COM1)
GP-Rear Module
(COM1)
ST
*2
(COM2)
LT3000 (COM1)
IPC
*3
*1 All GP models except AGP-3302B
*2 All ST models except AST-3211A and AST-3302B
*3 Available to use only the COM ports which can communicate in RS422/485(4 wire). (Except PE-4000B,
PS5000)
)
" „ IPC COM Port" (page 4)
1A
COM port conversion adapter by Pro-face
CA3-ADPCOM-01
+
Connector terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
+
Your own cable
Cable length:
500m or less
1B Your own cable
GP3000
*4
(COM2)
1C
Online adapter by Pro-face
CA4-ADPONL-01
+
Connector terminal block conversion adapter by Pro-face
CA3-ADPTRM-01
+
Your own cable
Cable length:
500m or less
1D
Online adapter by Pro-face
CA4-ADPONL-01
+
Your own cable
GP-4116T (COM1) 1G Your own cable
Cable length:
500m or less
GP4000
*5
(COM2)
GP-4201T (COM1)
SP5000
*6
(COM1/2)
SP-5B00 (COM2)
1E
RS-422 Terminal Block Conversion Adapter by Pro-face
PFXZCBADTM1
*7
+
Your own cable
Cable length:
500m or less
1B Your own cable
PE-4000B
*8
PS5000
*8
1F Your own cable
Cable length:
500m or less